|
通风速率及源项特性对室内甲醛扩散规律的影响 |
Influence of Ventilation Velocity and Source Characteristics on Indoor Formaldehyde Diffusion Law |
|
DOI: |
中文关键词: 室内甲醛 通风速率 源项特性 扩散规律 |
英文关键词: Indoor formaldehyde Ventilation velocity Source characteristic Diffusion law |
基金项目:陕西省教育厅专项科研计划基金资助项目(16JK2092) |
|
摘要点击次数: 789 |
全文下载次数: 78 |
中文摘要: |
采用Airpak软件模拟研究在通风速率、源项强度和源项面积多因素作用下的室内甲醛扩散规律。结果表明,在室内甲醛初始为零时,源项散发甲醛后,在2 000 s内室内甲醛浓度升高较快,之后处于平衡状态。在通风速率加倍时甲醛最高浓度降低56%,源项强度减半时甲醛最高浓度降低16%,源项散发面积减少37%时甲醛最高浓度降低24%。说明通风速率对室内甲醛浓度的影响最大,其次依次为源项散发面积和源项强度。 |
英文摘要: |
The influences of ventilation velocity, source intensity and emission area on indoor formaldehyde diffusion law were researched by Airpak software simulation. Results showed that in 2 000 seconds, formaldehyde concentration increased quickly from initial concentration of 0 mg/m3, then reached to balance. When the ventilation velocity doubled, the maximum concentration of formaldehyde decreased by 56%, as the source intensity decreased by half, the maximum concentration decreased by 16%, while the source emission area decreased by 37%, the maximum concentration reduced by 24%. It concluded that the ventilation velocity had the greatest impact on formaldehyde concentration, the next was emission areas, and the source intensity had the least influence. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |